I seem to be getting an error with a design, although I feel it could well be a jump drive issue. Each time I add a jump drive to this design I get a window with this.
"error in round
error 6 generated by aurora
overflow"
This happens whenever I add the drive in the design screen, or if I select the design later in the design screen, or anytime I try to highlight any ship of this design, such as the individual ship window. Here is the ship design.
MIL 402 Constellation class Exploration Ship 461 050 tons 7283 Crew 248157.9 BP TCS 9221 TH 6144 EM 6000
5552 km/s JR 7-750 Armour 8-531 Shields 200-300 Sensors 720/960/0/0 Damage Control Rating 61 PPV 267.72
Maint Life 0 Years MSP 20336 AFR 1700536% IFR 23618.6% 1YR 1128427797 5YR 1 Max Repair 159771 MSP
Intended Deployment Time: 60 months Flight Crew Berths 380
Hangar Deck Capacity 14500 tons Troop Capacity: 2 Companies Magazine 1047
Recreational Facilities
Fuel Harvester: 5 modules producing 600000 litres per annum
Powedll Class 9 Hyperdrive Max Ship Size 750000 tons Distance 750k km Squadron Size 7
Powedll Class 9 Fusion Drive (40) Power 1280 Fuel Use 11.45% Signature 153.6 Exp 8%
Fuel Capacity 70 000 000 Litres Range 238.7 billion km (497 days at full power)
Gagné Theta Shields (50) Total Fuel Cost 800 Litres per hour (19 200 per day)
Ye-Cheng Plasma Array (4x4) Range 384 000km TS: 20000 km/s Power 96-32 RM 7 ROF 15 24 24 24 24 24 24 24 20 18 16
Law Foundation Gatekeeper (4x8) Range 1000 km TS: 25000 km/s ROF 5 Base 50% To Hit
Hellmann Class 4 (2) Max Range: 384 000 km TS: 25000 km/s 97 95 92 90 87 84 82 79 77 74
Powedll Class 4 Fusion Reactor (3) Total Power Output 252 Armour 0 Exp 30%
Law Foundation Size 5 Launcher (5) Missile Size 5 Rate of Fire 25
Law Foundation Size 1 Launcher (10) Missile Size 1 Rate of Fire 5
Hellmann Missile Targeting R-60 (2) Range 107.3m km Resolution 60
Hellmann Missile Targeting R-1 (5) Range 172.8m km Resolution 1
Size 1 Spacial AMM (297) Speed: 80 000 km/s End: 3.5m Range: 16.7m km WH: 1 Size: 1 TH: 800/480/240
Size 5 Spacial ASM (150) Speed: 38 400 km/s End: 43.7m Range: 100.7m km WH: 9 Size: 5 TH: 153/92/46
Hellmann Search Sensor MR-180m R-10 (1) GPS 2400 Range 182.1m km Resolution 10
Hellmann Missile Sensor MKII (1) GPS 480 Range 115.2m km MCR 12.5m km Resolution 1
Hellmann Search Sensor MR-405m R-50 (1) GPS 12000 Range 407.3m km Resolution 50
Hellmann TH 720 Sensor (1) Sensitivity 720 Detect Sig Strength 1000: 720m km
Hellmann EM 960 Sensor (1) Sensitivity 960 Detect Sig Strength 1000: 960m km
The jump drive in question here is size 1680 HS, I also tried to use a 960 HS and a 778 HS drive and get the same error. I was able however to add a 389 HS drive with no error (although this is a drive too small to allow this ship to jump), as well as a 1800 HS commercial only drive. I know there is a limit with jump drives but was under the impression that ships of up to 1.2m tons could be made to be jump capable, so is this a bug or have I just made an error with my design?