Alright, so I built a jump tender:
AJT Type-C 74k class Jump Tender 17,350 tons 80 Crew 251 BP TCS 347 TH 0 EM 0
1 km/s JR 2-25(C) Armour 1-59 Shields 0-0 Sensors 6/6/0/0 Damage Control Rating 1 PPV 0
MSP 9 Max Repair 135 MSP
Intended Deployment Time: 3 months Spare Berths 3
JC74K Commercial Jump Drive Max Ship Size 74000 tons Distance 25k km Squadron Size 2
Thermal Sensor TH1-6 (1) Sensitivity 6 Detect Sig Strength 1000: 6m km
EM Detection Sensor EM1-6 (1) Sensitivity 6 Detect Sig Strength 1000: 6m km
This design is classed as a Commercial Vessel for maintenance purposes
My intention is for a tug to drag it to the jump point. This is working as intended. However, when I went to move it to another system, it gave the message that the jump drive wasn't big enough to allow the ship through. Initially I thought this was because the tug had only a 27k jump drive. However, I already HAVE a jump tender at that jump point, plus the jump tender itself should be able to jump itself through. Neither of these functioned.
Here's what I have tried:
Tug + Jump Tender jump as a TG. Failed because tug has only a 27k jump drive.
Jump Tender alone jumps as a TG. Failed because ??
Please again note that there is already a jump tender at this jump point.
What is gong wrong here? Have I mis-designed my jump tender?