Author Topic: 2.3 bugs  (Read 10592 times)

0 Members and 1 Guest are viewing this topic.

Offline Pete_Keller (OP)

  • Warrant Officer, Class 2
  • ****
  • P
  • Posts: 69
2.3 bugs
« on: October 08, 2007, 12:05:54 PM »
1)  I swapped out a staff member in my task force, and received the following error:  Error in RemoveCommander  Error 3265 -- Item not found in this collection.

2)  System map -- Select max subpulse 6 Hrs, Select increment time 30 Days.  You get the "There will be 120 subpulses in this increment.  Are you sure you wish to proceed?" message box, and if you select YES, there is no effect, time does not advance.

Pete
« Last Edit: December 31, 1969, 06:00:00 PM by Pete_Keller »
 

Offline kdstubbs

  • Warrant Officer, Class 1
  • *****
  • k
  • Posts: 81
Bugs in 2.3
« Reply #1 on: October 08, 2007, 12:21:02 PM »
Steve,
    I just down loaded 2.3 and installed the patch in my aurora files, root level.  I activated the software, and received an error message  Error 3061, too few parameters, expect 2.  I click ok, and then get multiple error 91 messages.  

What did I do wrong.  I probably need to uninstall and reinstall all the software, since I have never been able to get Vista to run Aurora or Starfire correctly.

Kevin

(I am not very software literate, I don't write code).
« Last Edit: December 31, 1969, 06:00:00 PM by kdstubbs »
Kevin Stubbs
 

Offline Erik L

  • Administrator
  • Admiral of the Fleet
  • *****
  • Posts: 5654
  • Thanked: 366 times
  • Forum Admin
  • Discord Username: icehawke
  • 2020 Supporter 2020 Supporter : Donate for 2020
    2022 Supporter 2022 Supporter : Donate for 2022
    Gold Supporter Gold Supporter : Support the forums with a Gold subscription
    2021 Supporter 2021 Supporter : Donate for 2021
(No subject)
« Reply #2 on: October 08, 2007, 12:35:39 PM »
I run Aurora on Vista with no issues. But then I'm also a developer, so I've probably got my machine configured a lot differently than yours.

Make sure you are in admin mode when you overwrite the files. I think that is probably the root of your issue.
« Last Edit: December 31, 1969, 06:00:00 PM by Erik Luken »
 

Offline welchbloke

  • Vice Admiral
  • **********
  • Posts: 1044
  • Thanked: 9 times
Re: Bugs in 2.3
« Reply #3 on: October 08, 2007, 02:15:55 PM »
Quote from: "kdstubbs"
Steve,
    I just down loaded 2.3 and installed the patch in my aurora files, root level.  I activated the software, and received an error message  Error 3061, too few parameters, expect 2.  I click ok, and then get multiple error 91 messages.  

What did I do wrong.  I probably need to uninstall and reinstall all the software, since I have never been able to get Vista to run Aurora or Starfire correctly.

Kevin

(I am not very software literate, I don't write code).


This sounds similar to the issue I had.  try turning off Universal Access Controller and then install the patch.  The easiest way to find UAC is to type it into help and follow the turn off/on link.

Hope this helps.

Welchbloke
« Last Edit: December 31, 1969, 06:00:00 PM by welchbloke »
Welchbloke
 

Offline Erik L

  • Administrator
  • Admiral of the Fleet
  • *****
  • Posts: 5654
  • Thanked: 366 times
  • Forum Admin
  • Discord Username: icehawke
  • 2020 Supporter 2020 Supporter : Donate for 2020
    2022 Supporter 2022 Supporter : Donate for 2022
    Gold Supporter Gold Supporter : Support the forums with a Gold subscription
    2021 Supporter 2021 Supporter : Donate for 2021
(No subject)
« Reply #4 on: October 08, 2007, 03:07:29 PM »
Still get Error 11, Divide by 0 when pulling up the fighter creation screen without all the prereq tech.
« Last Edit: December 31, 1969, 06:00:00 PM by Erik Luken »
 

Offline Þórgrímr

  • Rear Admiral
  • **********
  • Posts: 863
  • Thanked: 3 times
    • The World of the Gunny
(No subject)
« Reply #5 on: October 08, 2007, 03:56:00 PM »
Steve, I don't know if this is a bug or not, but I had a ship undergoing a minor overhaul and within 15 days I had lost the last three remaining spares to systems failures, then systems began to blow up since there were no spare parts left! And all of this is occuring while it was supposed to be replacing the spares!  :shock:

Am I missing something? The ship was above Terra when I issued the begin minor overhaul order. So what happened? Oh, and the ship only had a year and a half on its clock. I wanted to see how the new orders worked.



Cheers,
« Last Edit: December 31, 1969, 06:00:00 PM by Þórgrímr »
Sic vis pacem, para bellum
If you want peace, prepare for war
 

Offline SteveAlt

  • Global Moderator
  • Rear Admiral
  • *****
  • Posts: 820
  • Thanked: 8 times
(No subject)
« Reply #6 on: October 08, 2007, 03:57:15 PM »
Quote from: "Erik Luken"
Still get Error 11, Divide by 0 when pulling up the fighter creation screen without all the prereq tech.

Fixed for v2.4

Steve
« Last Edit: December 31, 1969, 06:00:00 PM by SteveAlt »
 

Offline SteveAlt

  • Global Moderator
  • Rear Admiral
  • *****
  • Posts: 820
  • Thanked: 8 times
(No subject)
« Reply #7 on: October 08, 2007, 03:58:28 PM »
[quote="
« Last Edit: December 31, 1969, 06:00:00 PM by SteveAlt »
 

Offline Erik L

  • Administrator
  • Admiral of the Fleet
  • *****
  • Posts: 5654
  • Thanked: 366 times
  • Forum Admin
  • Discord Username: icehawke
  • 2020 Supporter 2020 Supporter : Donate for 2020
    2022 Supporter 2022 Supporter : Donate for 2022
    Gold Supporter Gold Supporter : Support the forums with a Gold subscription
    2021 Supporter 2021 Supporter : Donate for 2021
(No subject)
« Reply #8 on: October 08, 2007, 03:58:59 PM »
Error in CommnaderCheckHealth still appears.
« Last Edit: December 31, 1969, 06:00:00 PM by Erik Luken »
 

Offline Þórgrímr

  • Rear Admiral
  • **********
  • Posts: 863
  • Thanked: 3 times
    • The World of the Gunny
(No subject)
« Reply #9 on: October 08, 2007, 04:03:58 PM »
Quote from: "SteveAlt"
Just to check, were the maintenance facilities on Terra large enough for the ship?

Steve


Yes, the Megellus is 5400 tons and the maint capacity is 10,000 tons.



Cheers,
« Last Edit: December 31, 1969, 06:00:00 PM by Þórgrímr »
Sic vis pacem, para bellum
If you want peace, prepare for war
 

Offline Shinanygnz

  • Lieutenant
  • *******
  • S
  • Posts: 194
  • Thanked: 6 times
(No subject)
« Reply #10 on: October 08, 2007, 04:12:17 PM »
In the Romanov game, when opening the Galactic Map with F11, get "Error 53 was generated by Aurora. File not found: 'Flags\flag0323.jpg'

Flag files only go up to flag0319.jpg in the base install plus the ExtraGraphics.zip file

Stephen
« Last Edit: December 31, 1969, 06:00:00 PM by Shinanygnz »
 

Offline SteveAlt

  • Global Moderator
  • Rear Admiral
  • *****
  • Posts: 820
  • Thanked: 8 times
(No subject)
« Reply #11 on: October 08, 2007, 04:22:20 PM »
Quote from: "Shinanygnz"
In the Romanov game, when opening the Galactic Map with F11, get "Error 53 was generated by Aurora. File not found: 'Flags\flag0323.jpg'

Flag files only go up to flag0319.jpg in the base install plus the ExtraGraphics.zip file

Stephen

Here are the missing flags

http://www.pentarch.org/aurorafiles/Ins ... 4Flags.zip (46k)

Steve
« Last Edit: December 31, 1969, 06:00:00 PM by SteveAlt »
 

Offline Erik L

  • Administrator
  • Admiral of the Fleet
  • *****
  • Posts: 5654
  • Thanked: 366 times
  • Forum Admin
  • Discord Username: icehawke
  • 2020 Supporter 2020 Supporter : Donate for 2020
    2022 Supporter 2022 Supporter : Donate for 2022
    Gold Supporter Gold Supporter : Support the forums with a Gold subscription
    2021 Supporter 2021 Supporter : Donate for 2021
(No subject)
« Reply #12 on: October 09, 2007, 09:27:25 AM »
If you assign a name them to a PDC class, when built, they do not take the name.

I.E. The National class PDC has the nations theme. However, when built, they take the name National 001, etc.
« Last Edit: December 31, 1969, 06:00:00 PM by Erik Luken »
 

Offline Erik L

  • Administrator
  • Admiral of the Fleet
  • *****
  • Posts: 5654
  • Thanked: 366 times
  • Forum Admin
  • Discord Username: icehawke
  • 2020 Supporter 2020 Supporter : Donate for 2020
    2022 Supporter 2022 Supporter : Donate for 2022
    Gold Supporter Gold Supporter : Support the forums with a Gold subscription
    2021 Supporter 2021 Supporter : Donate for 2021
(No subject)
« Reply #13 on: October 09, 2007, 10:12:16 AM »
No way to delete a ground unit creation task.
« Last Edit: December 31, 1969, 06:00:00 PM by Erik Luken »
 

Offline Erik L

  • Administrator
  • Admiral of the Fleet
  • *****
  • Posts: 5654
  • Thanked: 366 times
  • Forum Admin
  • Discord Username: icehawke
  • 2020 Supporter 2020 Supporter : Donate for 2020
    2022 Supporter 2022 Supporter : Donate for 2022
    Gold Supporter Gold Supporter : Support the forums with a Gold subscription
    2021 Supporter 2021 Supporter : Donate for 2021
(No subject)
« Reply #14 on: October 09, 2007, 10:44:28 AM »
Error in cboFleets.
Error 94
Invalid use of Null.

When selecting a PDC TF.
« Last Edit: December 31, 1969, 06:00:00 PM by Erik Luken »