Aurora 4x
New Players => The Academy => Topic started by: martinuzz on October 07, 2014, 04:05:04 AM
-
So I designed a PDC with some meson turrets, and AMM launchers.
Goalkeeper class Planetary Defence Centre 30,000 tons 467 Crew 3890.5 BP TCS 600 TH 0 EM 0
Armour 16-86 Sensors 1/0 Damage Control Rating 0 PPV 43.4
Intended Deployment Time: 3 months Spare Berths 1
Troop Capacity: 5 Battalions Magazine 1258
Fuel Capacity 260,000 Litres Range N/A
Twin R6/C4 Meson Cannon Turret (3x2) Range 60,000km TS: 20000 km/s Power 8-8 RM 6 ROF 5 1 1 1 1 1 1 0 0 0 0
PDC Fire Control S08 96-16000 Mk1 (3) Max Range: 192,000 km TS: 16000 km/s 95 90 84 79 74 69 64 58 53 48
Stellarator Fusion Reactor 24 (1) Total Power Output 24 Armour 0 Exp 5%
PDC Size 1 Missile Launcher Mk1 (8) Missile Size 1 Rate of Fire 5
Missile Fire Control FC52-R1 (PDC AMM) Mk1 (8) Range 52.8m km Resolution 1
Size 1 Anti-missile Missile Mk1 (8) Speed: 33,600 km/s End: 3.2m Range: 6.6m km WH: 1 Size: 1 TH: 212/127/63
Missile to hit chances are vs targets moving at 3000 km/s, 5000 km/s and 10,000 km/s
If you are wondering, the active sensor is on a seperate PDC design, the fuel is just for RP purpose, and I dun goofed on adding ordnance properly in the design, so I had to add those manually later. Don't worry they have full magazines now.
I gave it 1 firecontrol per turret / launcher, and linked those in the ship>>combat settings window.
http://puu.sh/c2L1V/8a3af36015.png
In that same window, I can set PD range in 10k units, and choose between area defense / final fire / final fire (self only), or in the case of AMM, the amount of anti-missiles per missile to fire. But if I select a firecontrol, set a PD range, and choose the appropriate PD mode, then click the 'set mode' button, it does not save either the range, nor the PD mode. Next time I select that firecontrol, the settings are reset back to default.
How do I set PD modes?
Additional question: Is there a faster way to link weapons to firecontrols than one ship at a time?
-
What does the summary view say, does it show the setting there or is it not mentioned there either?
-
Heh, the summary view does show the correct settings. Guess it's all fine then, thanks
-
There should be button assign firecontrols for all ships of the class or something similar in the combat window(?) I think. I use it to assign firecontrols and stuff myself
-
Isn't that just for assigning fire controls to targets, but not weapons to firecontrols, or PD mode?
-
It works for all functions.