Hey everyone, just found aurora a couple of days ago and have been doing conventional starts, learning slowly. Just got to the point of developing gravitational survey sensors and surveying jump points this afternoon and ran into a problem. My survey ships (now totalling 3) go to the jump point as per orders, then just sit there with the "SP Needed: 400" message. The ships do have grav sensors in the active sensor slot. Survey ship info is below, along with the design tech page for the Grav Sensor Prototype that I'm using. Thanks for your help in advance.
North Carolina class Gravsurvey Ship 3,450 tons 93 Crew 127. 4 BP TCS 69 TH 125 EM 0
1811 km/s Armour 1-20 Shields 0-0 Sensors 5/5/0/0 Damage Control Rating 1 PPV 0
MSP 23 Max Repair 16 MSP
Commericial Nuclear Thermal Engine E1 (2) Power 62. 5 Fuel Use 10% Signature 62. 5 Armour 0 Exp 1%
Fuel Capacity 50,000 Litres Range 260. 8 billion km (1666 days at full power)
Grav Sensor Prototype (2) GPS 1000 Range 5. 0m km Resolution 100
Thermal Sensor TH1-5 (1) Sensitivity 5 Detect Sig Strength 1000: 5m km
EM Detection Sensor EM1-5 (1) Sensitivity 5 Detect Sig Strength 1000: 5m km
This design is classed as a Commercial Vessel for maintenance purposes
Active Sensor Strength: 10 Sensitivity Modifier: 50%
Sensor Size: 1 HS Sensor HTK: 1
Resolution: 100 Maximum Range vs 5000 ton object (or larger): 5,000,000 km
Range vs 1000 ton object: 200,000 km
Range vs 250 ton object: 12,500 km
Chance of destruction by electronic damage: 100%
Cost: 10 Crew: 5
Materials Required: 2. 5x Duranium 7. 5x Uridium
Development Cost for Project: 100RP