There seems to be a new issue with the troop Transport capacity.
started in 1.90, updated to 1.92, 3 years into the campaign
Troop carrier with 10x Standard Troop bays = Troop Capacity 10,000 tons
wants to load a size 9,872 Formation ->
"TT X unable to load Ground Units from Terra as the available capacity was insufficent for the target Formation"
and i just tested loading a size 937 formation, same error - the TT design does not look too wrong to me and should be able to handle this:
TT Austria (Zambia class Troop Transport) 29,624 tons 186 Crew 687.7 BP TCS 592 TH 750 EM 0
1265 km/s JR 2-25(C) Armour 1-85 Shields 0-0 HTK 68 Sensors 6/0/0/0 DCR 1 PPV 0
MSP 14 Max Repair 54.9 MSP
Troop Capacity 10,000 tons Cargo Shuttle Multiplier 2
Commander Control Rating 1 BRG
Intended Deployment Time: 9 months
Fuchida-O'Brien JC30K Commercial Jump Drive Max Ship Size 30000 tons Distance 25k km Squadron Size 2
Airbus/ESA Commercial Improved Nuclear Pulse Engine EP125.0 (6) Power 750 Fuel Use 7.83% Signature 125 Explosion 5%
Fuel Capacity 500,000 Litres Range 38.8 billion km (354 days at full power)
Philips Active Search Sensor AS30-R160 (1) GPS 2560 Range 30m km Resolution 160
Philips Thermal Sensor TH1.0-6 (1) Sensitivity 6 Detect Sig Strength 1000: 19.4m km
This design is classed as a Commercial Vessel for maintenance purposes
Addendum: I just noticed the formation is loaded into the Transports but still gave that error. Maybe queuing 2 load orders for the 2-ship Transport fleet was the error?
Addendum 2: unloading both formations from the 2 ship fleet and loading 1 back in produces the pickup failed message again, but the TT has the formation loaded afterwards.
Addendum 3: My empire only has these 2 sub-10k formations (pic5) and the Troop Transport fleet states the capacity of 20k (pic6), and I know I moved a 50kt Brigade (a 10kt Brigade HQ, 3 10kt Regiments and 2 5kt support batallions) with 5 similar ships in 1.80, so I kinda wonder what is going wrong here.